CRI220/230 High pressure common rail injector testerCRI220/230 High pressure common rail injector testerCRI220/230 High pressure common rail injector testerCRI220/230 High pressure common rail injector testerCRI220/230 High pressure common rail injector testerCRI220/230 High pressure common rail injector tester
CRI220/230 High pressure common rail injector testerCRI220/230 High pressure common rail injector testerCRI220/230 High pressure common rail injector testerCRI220/230 High pressure common rail injector testerCRI220/230 High pressure common rail injector testerCRI220/230 High pressure common rail injector tester

CRI220/230 High pressure common rail injector tester

Support magnetic injectors(BOSCH, DENSO,DELPHI, CAT);

Overcurrent and short circuit protection

Injector dynamic stroke measurement AHE, only supported by CRI230;

CRI220/230 High pressure common rail injector tester user manual

 

{C}Ÿ {C}Support magnetic injectors(BOSCH, DENSO,DELPHI, CAT);

{C}Ÿ {C}Overcurrent and short circuit protection

{C}Ÿ {C}Injector dynamic stroke measurement AHE, only supported by CRI230;

 

 

1 Brief  introduction

CRI220/230 high pressure common rail injector tester can drive common rail injectors such as Bosch, Denso, Delphi, CAT, etc. The test conditions can be set by the user according to their actual conditions, which is convenient for maintenance personnel to the high pressure common rail injector. Judgment and maintenance of working conditions under different working conditions.

2Check the accessories

After receiving the goods, please open the box and check box items are consistent with the packing list immediately if any parts are missing, please contact the service personnel.

3Operating  Instructions

Front view

NANT Test Equipments Co.,Ltd 

 

 

 

A. ON/OFF knob,

Press the ON/OFF knob to turn on and off the fuel injector drive;

Turn the ON/OFF knob left and right to adjust the pulse width, 0-6000 us;

 

B. MODE knob

Press the MODE knob to select the injector type (BOSCH,DENSO,DELPHI,CAL_L,CAL_H); AHE MODE is only supported by CRI230;

After  the  AHE  is  triggered  once,  it  takes  10  seconds  to  trigger  again.

Rotate the MODE knob left and right to adjust the injection frequency, 1-30Hz; AHE MODE: 5-16A, only supported by CRI230;

 

Back view

NANT Test Equipments Co.,Ltd

Power socket: AC: 100-240V;

fuel injector drive harness;

 

4Warranty  Policy

1, normal use, due to product quality problems, free maintenance within one year;

2. If the product is damaged due to abnormal use, the user shall bear the cost of maintenance;

3, product lifetime maintenance, beyond the warranty period, the user bears the cost of maintenance costs.

LEAVE MESSAGE

If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.

Cooperative
partner