EDC VE/VP Pump TesterEDC VE/VP Pump Tester
EDC VE/VP Pump TesterEDC VE/VP Pump Tester

EDC VE/VP Pump Tester

After the pump assembly is completed

Connect the cable

Do not turn on the power switch

Use a multimeter to measure static resistance

  Satic test

After the pump assembly is completed, connect the cable, do not turn on the power switch, use a multimeter to measure static resistance, refer to the following table:

Static Test Table

Temp.

Drive actuator

Position Sensor

Temp. Sensor

22.5℃

Pin

Unit:Ω

Pin

Unit:Ω

Pin

Unit:KΩ

5~6

0.4~1.5

1~2

5.7~7

4~7

1.2~4.0

 

 

2~3

5.7~7

 

 

 

 

1~3

10.5~12.5

 

 

60℃

5~6

0.45~1.3

 

 

4~7

0.3~1.8

22.5℃60℃

9~10
Timing device

14.3~21

 

 

 

 

8~9
Oil

8~12

 

 

 

 

  Chassis panel

NANT Test Equipments Co.,Ltd

 

  Operating Instructions

The default boot into the closed loop mode, four sets of parameters can be preset, short press ADJ button to switch the packet, turn the knob to adjust the current value:

NANT Test Equipments Co.,Ltd

Long press the ADJ button to switch to the open-loop mode,four sets of parameters can be preset,turn the knob to adjust the current value:

NANT Test Equipments Co.,Ltd

Oil pump button control supply oil solenoid, you need to open at repair the pump; Angle button control Timing solenoid, opens at 400 rpm.

Long press oil Pump button into setting: You can set the voltage value of SET1~SET4, Press ADJ button to save the current values and packet switching, swirling around ADJ key to change the current value, Factory items, whether to restore factory default, swirling around ADJ button to select Yes or No, press the ADJ button to confirm.

  Dynamic Test
Dynamic Test Table
Pump: Part NO.: 460404972
  Pump Model: VE4/10E2100R724
  Engine: 1.9ISDI
Test Conditions: Test Temp.: 55℃ Supply oil pressure: 0.03~0.04Mpa
  Fuel pump assembly: 1688901114 Opening pressure: 20.7Mpa
Speed:RPM Detection voltage:mV Cavity pressure:Mpa Timing Stroke Oil Devices Cm/1000s Timing device  Solenoid Back to oil
500 2510 0.8±0.07 9.8±0.1     138±40
800 2650     36.4±0.2    
1100 2420     27.7±1.5    
2100 3330 1.09±0.07 12.3±0.7 38.3±1.5   158.3±40
300 2510 0.72±0.12 8.7±1.5      
400 1820     10±2.5 12  
100 2820     48.5±7 12  

 

LEAVE MESSAGE

If you have any questions, feedback or comments, please fill out the form below and we will reply you back as soon as possible.

Cooperative
partner